Car OBD2 Tools You May Need for Your Vehicle

The MaxiScan MS309 Code Scanner Reader can be efficiently used to detect fault codes in your car. This tool provides easy access to various Trouble Codes and also has definitions for them. The scanner is OBD2 compatible and can be connected with most of the modern cars available in the current market. The scanner is used to read, both manufacture specific codes and generic codes. It is possible to retrieve generic codes of type P0, P2, P3 and U0, manufacture specific P1, P3, U1 codes and also pending codes. It is easy and simple to use. The scanner needs to be connected with the OBD port of the car and the device automatically scan for the protocol that the car uses and display the fault codes which it has found.

The ELM 327 USB OBD2 can be connected with your car's computer to monitor the status of the car. It can be used in the monitoring of various data such as Exact Throttle Position, Rate of the Air Flow, Load Value Calculation, Temperature of the coolant, RPM of the Engine, Fuel Pressure, Intake Air Temperature, Pressure Intake, Short Term as well as Long term Fuel Trim, Sensor Voltages and the associated fuel trims, Timing Advance and Vehicle Speed. The device uses high performance CAN interface for connection and hence very high speed can be achieved. It is easy to use the device and it operates at 12 V.

The ELM327 V1.5 Diagnostic Scan Tool is used to detect data in car such as RPM rate of the Engine, temperature of the coolant, speed of the vehicle, fuel pressure, air pressure rate etc. The test is performed with the Scan tool to detect errors in any of the above mentioned data. The main advantage of the scan tool is that, it is wireless and works with the help of Bluetooth support. The device has also got built in USB to serial converter. It is possible to read both manufacture specific as well as generic trouble codes with the help of this device. There are more than 3000 generic code words already added to the database. The device comes with a software CD which could be installed in your system to monitor the data provided by the device.

VAG COM 11.11.3 is a diagnostic cable which is used for measuring various values and control modules with the help of the advanced UDS protocol. The main advantage of using this cable is that, it can match airbags whereas the earlier versions can only read and erase coding. The device also supports protocols such as TP1.6, which speeds up the device modules on other models. The cable can also read the mileage stored in EDC16 ECU's. The new design has got over 13,000 fault codes and can measure value texts. It works well with both 32 bit and 64 bit operating systems such as Windows XP, Vista and 2000. It provides supports in three languages, English, Russian and Czech. The cable is easy to use and comes with a software CD, which could be installed in the system for better access.

We manufacture and directly export from our factory and pass on the saving to our clients.  You can place orders directly at our website: http://www.obd2cart.com. Thank you!